Platform: BlueSCSI
FW Version: 2024.10.26-rel Oct 26 2024 22:02:38
I2C Supported
Flash chip size: 2048 kB
 
=== SD Card Info ===
SD card detected, exFAT volume size: 121910 MB
SD Name: SD128, MID: 0x03, OID: 0x53 0x44
 
=== Global Config ===
Config file bluescsi.ini not found, using defaults
Active configuration:
 
=== Finding images in / ===
== Opening /HD1 HDMAIN.hda for ID: 1 LUN: 0
---- WARNING: file /HD1 HDMAIN.hda is fragmented, see https://github.com/BlueSCSI/BlueSCSI-v2/wiki/Image-File-Fragmentation
---- WARNING: This image does not appear to be a valid Macintosh Device image. See: https://github.com/BlueSCSI/BlueSCSI-v2/wiki/Disk-Images
---- Image ready
== Opening /TP3 TAPE1.hda for ID: 3 LUN: 0
---- WARNING: file /TP3 TAPE1.hda is fragmented, see https://github.com/BlueSCSI/BlueSCSI-v2/wiki/Image-File-Fragmentation
---- Configuring as tape drive based on image name
---- Image ready

=== ROM Drive ===
Platform supports ROM drive up to 1692 kB
---- ROM drive image not detected
 
=== Configured SCSI Devices ===
* ID: 1, BlockSize: 512, Type: Fixed, Quirks: Apple, Size: 9216048kB
* ID: 3, BlockSize: 512, Type: Tape, Quirks: Apple, Size: 4096048kB
 
Initialization complete!
INFO: Pico Voltage: 3.265V.
SCSI ID 1 negotiated synchronous mode 10 MB/s (period 4x25 ns, offset 15 bytes)
SCSI ID 3 negotiated synchronous mode 10 MB/s (period 4x25 ns, offset 15 bytes)