Recorders are different, and there is no single way to connect a CD-Recorder to your Macintosh. For a successful setup, read and follow the instructions that came with your CD-Recorder.

Tips for SCSI Devices

•	Always turn off your computer and any SCSI devices while you connect cables.
•	Make sure your recorder is connected securely to the Macintosh, using as short a cable as possible.
•	If your recorder is a SCSI device, and you have multiple devices in a SCSI chain:
	• Keep the chain as short as possible. Limit the number of devices in the chain, and use the shortest cables possible. • Verify that your SCSI chain is correctly terminated. For information on termination, see the device owner's manual. • Consider removing all but the recorder from the SCSI chain when you are recording. You can avoid problems and achieve more satisfying results this way.

Tips for Other Devices

•	To find out if your recorder is supported, please go to this URL Supported recorders

Expanding the RAM Cache Before Recording

Allocate most of your unused RAM to the RAM Cache (choose Preferences from the Toast Edit menu).

Copying Data from a Network Volume

Data transfer performance depends on factors not in Toast's control (for example, your LAN or Internet traffic at a given time of day). It is possible to record from a network volume, but it's not recommended. You'll get better results if you copy the files to your hard disk and record them from there.

If you are determined to burn a CD that requires copying data from a network volume, please record in Simulation Mode first.