Platform: BlueSCSI (Pico1/W)
FW Version: 2025.07.11-rel Jul 11 2025 20:42:22
Flash chip size: 2048 kB
I2C Supported
 
=== SD Card Info ===
SD card detected, FAT32 volume size: 30516 MB
SD Name: EB1QT, MID: 0x1B, OID: 0x53 0x4D
Speed grade set to  reclocking system
Initial Clock set to 133MHz
Reclocking the MCU to 200MHz
Setting the SDIO clock to 40MHz
After reclocking, system reports clock set to 200MHz
======== Reinitializing BlueSCSI after reclock ========

=== Global Config ===
Reading configuration from bluescsi.ini

=== Finding images ===
=== Finding images in / ===
== Opening /HD00_512 800MB.hda for ID:0 LUN:0
---- Configuring as disk drive
== Opening /HD3 Applications.hda for ID:3 LUN:0
---- Configuring as disk drive

== Platform supports ROM drive up to 1465 kB
 
=== Configured SCSI Devices ===
ID: 0, BlockSize: 512, Type: Fixed, Quirks: Apple, Size: 819248kB
ID: 3, BlockSize: 512, Type: Fixed, Quirks: Apple, Size: 1843248kB

Waiting for USB enumeration to enter Card Reader mode.
Waiting for USB enumeration timed out after 1000ms.
-- Try increasing 'USBMassStorageWaitPeriod' in the bluescsi.ini
Clock set to: 200MHz
Initialization complete!
Disabling status LED
INFO: Pico Voltage: 3.250V.