Platform: BlueSCSI (Pico1/W)
FW Version: 2025.10.27-rel Oct 27 2025 20:32:19
Flash chip size: 2048 kB
I2C Supported
Reclock RP2040 & Pico 1/1W based boards to standardized speed
Initial Clock set to 133MHz
Reclocking the MCU to 203MHz
Setting the SDIO clock to 41MHz
After reclocking, system reports clock set to 203MHz
 
=== SD Card Info ===
SD card detected, FAT32 volume size: 30516 MB
SD Name: EB1QT, MID: 0x1B, OID: 0x53 0x4D

=== Global Config ===
Reading configuration from bluescsi.ini
-- EnableSCSI2 = No

=== Finding images ===
=== Finding images in / ===
== Opening /HD0_512_bsd209_RA92.hda for ID:0 LUN:0
---- WARNING: /HD0_512_bsd209_RA92.hda is fragmented, see https://github.com/BlueSCSI/BlueSCSI-v2/wiki/Image-File-Fragmentation
---- Configuring as disk drive

== Platform supports ROM drive up to 800 kB
 
=== Configured SCSI Devices ===
ID: 0, BlockSize: 512, Type: Fixed, Quirks: Apple, Size: 1470475kB

Clock set to: 203MHz
Initialization complete!
Disabling status LED
INFO: Pico Voltage: 3.280V.
SCSI ID 0 negotiated synchronous mode 5 MB/s (period 4x52 ns, offset 15 bytes)
INFO: You may get a boost from overclocking as your system supports synchronous SCSI speeds. https://bluescsi.com/docs/Ultra-SCSI-Fast20-OverClock
WARNING: Host used command 0x1A which is affected by drive geometry. Current settings are 63 sectors x 255 heads = 16065 but image size of 2940951 sectors is not divisible. This can cause error messages in diagnostics tools.
SCSI ID 0 negotiated synchronous mode 5 MB/s (period 4x52 ns, offset 15 bytes)
SCSI ID 0 negotiated synchronous mode 5 MB/s (period 4x52 ns, offset 15 bytes)
SCSI ID 0 negotiated synchronous mode 5 MB/s (period 4x52 ns, offset 15 bytes)