;	+-----------------------+
;	|			|
;	|  C O N F I G . L I B	|
;	|			|
;	+-----------------------+
;
; Configuration file for building BIOS FDDISK1 module
; for use with D2IMD.  (Can't call these directly via
; the BIOS because they are in bank 0 and we are in
; the TPA memory bank)
;
; Modification History
;
;	26-May-2007	Tony Nicholson	Initial version
;
;	20-Jun-2008	Tony Nicholson	Add equates so the latest
;					version of FDDISK1 with SIMH
;					support can be used
;	03-Aug-2008	Tony Nicholson	Add support for BigBoard-II
;					1024/9 sectors per track format
;

true	equ	-1
false	equ	not true

s100$system equ	true	; TRUE for "real" S-100 hardware
simh	equ	false	; TRUE for running under SIMH
;
; Don't change any of the following
;
banked	equ	true	; TRUE for Banked memory
bankmem	equ	false	; TRUE to support Cromemco Bank Select memory boards
ldrbios equ	false	; TRUE to generate Loader BIOS 
disk1	equ	true	; TRUE for CompuPro DISK1 floppy controller
disk1$debug equ	true	; TRUE enables verbose error messages in FDDISK1
disk1$minicd equ false	; TRUE if 5.25" minifloppy on drives C: and D:
disk1$bb2$read9 equ true; TRUE to include BigBoard-II 1024/9 format
disk1$userf equ false	; TRUE for get/set D1FLAG via USERF routine
disk1$skew equ false	; TRUE to enable skew toggle via D1FLAG
disk1$ibm$at equ false	; TRUE for IBM-PC/AT HD 80 Track drive support

;
; Dummy CP/M drive to physical disk mapping table macro
;
drivetable macro

  if s100$system
	extrn	fddd0,fddd1
	defw	fddd0,fddd1			; Drive A & B
    if disk1$minicd
	extrn	fddd2,fddd3
	defw	fddd2,fddd3			; Drive C & D
    else
	defw	0,0
    endif
	defw	0,0,0,0,0,0,0,0,0,0,0,0		; Drives E-P don't exist
  endif

  if simh
	extrn	fddd0,fddd1,fddd2,fddd3
	defw	0,0,0,0,0,0,0,0			; Drives A-H are hard disks
	defw	fddd0,fddd1,fddd2,fddd3		; Drives I-L
	defw	0,0,0,0				; Drives M-P don't exist
  endif

	endm